Inline X-ray machine for battery LX-1Y60-140

UNI X-Ray LX-1Y60-110 is a fully automated detection machine that analyzes lithium batteries, using an imaging system. It is developed with the full capacity to work both online and offline to detect cylindrical 18650/26650 lithium batteries.

Additional information

Weight 2500 kg
Dimensions 330 × 150 × 100 cm
Power

4 Kw

Applicable product type

18650 / 21700 / 26650 cylinder battery

Maximum capacity

60ppm / 120ppm

Description of Inline X-ray machine for battery LX-1Y60-140

UNI X-Ray LX-1Y60-110 is a fully automated x-ray inspection of batteries machine that analyzes lithium batteries, using an imaging system. It is developed with the full capacity to work both online and offline to detect cylindrical 18650/26650 lithium batteries. When it measures one battery at a time, the working efficiency is 60PPM.

 

The cylindrical battery X-Ray online inspection machine makes use of PLC control. With this, it sends X-rays through the X-Ray generator, through which it makes penetration into the battery’s interior. The penetrated X-Ray enables the machine to make images of the system, which is processed, using the device software.

 

At this point, the battery is automatically measured and judged according to how good it is. This process makes it very easy to pick out bad products. The front and back of the equipment can be docked with the production line.

 

The LX-1Y60-110 uses a micro-focus X-ray tube, which gives room for the production of more realistic high-resolution images, battery loading in the form of the turntable, which is more efficient, and X-ray image magnification can be adjusted.

This x ray battery machine has a user-friendly software interface; you only need to set a few parameters and you are good to go.

This one X-ray machine can automatically and accurately determine defective products and sort them without workers’ participation, which greatly improves production efficiency and reduces the cost of production.

The system comes with SPC statistical analysis software, which is convenient for production process management and quality data statistics.

 

PRODUCT SPECIFICATIONS:

  • The micro-focus x-ray tube makes the image clearer
  • The magnification can be adjusted
  • User-friendly software interface, easy to operate
  • The software automatically determines the consistency and quality assurance of the product
  • The design fully considers the safety factors to ensure the safety protection of the human body
  • Turntable mechanism, high efficiency, and stability
  • simple parameter setting, automatically determine the sorting of defective products
  • Fully automated operation, reducing workforce and production costs, improving production efficiency and quality consistency
  • Comes with SPC software analysis to facilitate process control and quality data analysis
  • Beautiful appearance enhances the corporate image of customers.

 

USES:

  • To detect the data of the cylindrical battery’s winding alignment
  • To make deep penetration into the battery shell
  • To roll groove size

 

FEATURES:

  • Automatic judgment
  • Data storage
  • Defective product identification
  • Screening and isolation
  • Realizing the automatic control of the entire testing process

 

 

PRODUCT PARAMETERS:

Equipment Parameters Equipment Size 3300 mm x 1500 mm x 2000 mm (L*W*H)
Equipment Weight 2.5 t
Working Environment 0 ~ 40 °C
Power 4 Kw
System resolution 60μM
Mode of operation On-Line Inspection
X-ray Tube Types Closed type
Maximum tube voltage 110kV / 120kV
Maximum tube current 0.45mA
Focus size 15μm
Number of tubes 1 or 2
Image detector Types Image intensifier (flat panel detector)
Resolution 110 LP / cm
Image intensifier size 4″
Number of imagers 1 or 2
Applicable product type 18650 / 21700 / 26650 cylinder battery
Maximum capacity 60ppm / 120ppm
Crop rate ≥98%
Applicable product size 18,650,  21,700, 26,650 cylindrical batteries
Test Item Alignment, Ping Tube, roll groove depth, etc.
Error rate Unless the critical value is within 60 m of the upper / lower limit ≤2%
False-positive rate ≤0%

 

X ray machine for battery inspection

 

 

Ask our Experts for Solution!

If you can’t find answers to a specific question, simply click on the “Send Email” button and we will contact you within 12 hours.

Get a Quick Quote

Send us an inquiry, we will feedback to you ASAP!